ryan newman 2011
images Ryan Newman 4-Wide Firesuit FT
zCool
05-21 03:06 PM
Well i dont think thats true that it is must that i have to send the AC21. Like i can always get the employment letter from my employer who sponsered me for my green card. All i was asking was that IF I DO GET THE EVL RFE (I HOPE NOT) then in that instance what i am suppose to do? Get a letter from my current employer or the employer who sponsored me for green card?
You have to get it from your prospective permanant employer. If you have intention of working for your past employer after you get GC, that would be it,
If you've made decision to work for your current employer on Permanant basis then that would be it..
It's not good or bad.. just keep it simple
You have to get it from your prospective permanant employer. If you have intention of working for your past employer after you get GC, that would be it,
If you've made decision to work for your current employer on Permanant basis then that would be it..
It's not good or bad.. just keep it simple
wallpaper Ryan Newman middot; 8 February 2011
smiling08
09-19 08:52 AM
HI All,
I am curious how long does the I-824 gonna take, because I may need to change the consulate in Canada to activate my H1-B visa. But I dare that there is not enough time. Thanks a lot!
Fan
I am curious how long does the I-824 gonna take, because I may need to change the consulate in Canada to activate my H1-B visa. But I dare that there is not enough time. Thanks a lot!
Fan
gimme Green!!
08-19 12:58 PM
Thanks Dealsnet!!
I did reply same questions from many people before.
Give me green.
See the linkhttp://immigrationvoice.org/forum/showthread.php?p=271903#post271903
About ADIT:
ADIT=Alien Documentation Identification & Telecommunication Systems.
Could mean biometrics not up to date or just stamp in passport.
Either way they will tell you what they want.
ADIT (I-551) stamping
�
Applicant appears at local USCIS for ADIT processing, as outlined in AOS approval letter. Applicant will not be scheduled for an ADIT appointment, ADIT processing is done by "walk-in" basis ONLY.
�
Once the applicant adjusts his/her status by completing ADIT processing, s/he is given the I-551 permanent resident stamp in his/her passport.
I did reply same questions from many people before.
Give me green.
See the linkhttp://immigrationvoice.org/forum/showthread.php?p=271903#post271903
About ADIT:
ADIT=Alien Documentation Identification & Telecommunication Systems.
Could mean biometrics not up to date or just stamp in passport.
Either way they will tell you what they want.
ADIT (I-551) stamping
�
Applicant appears at local USCIS for ADIT processing, as outlined in AOS approval letter. Applicant will not be scheduled for an ADIT appointment, ADIT processing is done by "walk-in" basis ONLY.
�
Once the applicant adjusts his/her status by completing ADIT processing, s/he is given the I-551 permanent resident stamp in his/her passport.
2011 Ryan Newman
amsh
08-21 05:23 PM
I had got my EB3 priority date recaptured in EB2 I140 filed latter .After doing this ,I asked my lawyer to interfile the case (ask them write a letter to USCIS to convert my earlier filed I485 application in EB3 to EB2) .
My attorney said that ,this can only be done when priority date is current.But some people in similar condition ,told me that this interfile application can be written, even if the priority date is not current as there is no written procedure for it specified by USCIS .
And it is better to send that application ASAP ,as it might help my green card processing time ,since after getting that interfile application ,USCIS might go ahead and do the other procedures on it like name check and other check etc .My priority date is in EB2 India and 2 months away from this month priority dates announced by USCIS.
I have two questions
1)can the interfile application for I485 ,as specified above ,be send to USCIS ,even if the priority date is not current .
2)can it be send twice that is now when priority date is not current and latter when priority date becomes current ?
Best regards and thanks for helping !
My attorney said that ,this can only be done when priority date is current.But some people in similar condition ,told me that this interfile application can be written, even if the priority date is not current as there is no written procedure for it specified by USCIS .
And it is better to send that application ASAP ,as it might help my green card processing time ,since after getting that interfile application ,USCIS might go ahead and do the other procedures on it like name check and other check etc .My priority date is in EB2 India and 2 months away from this month priority dates announced by USCIS.
I have two questions
1)can the interfile application for I485 ,as specified above ,be send to USCIS ,even if the priority date is not current .
2)can it be send twice that is now when priority date is not current and latter when priority date becomes current ?
Best regards and thanks for helping !
more...
GCard_Dream
04-05 03:29 PM
I am in my 6th year H1B and have an approved I-140 (EB3) with PD in 2005. I am seriously considering moving to another company in order to be able to file in EB2 because of current priority date in that category. You guessed it; I am from ROW and I will qualify for EB2.
I have had several interviews but some of the employers were worried about the fact that I am in my 6th year and whether there was enough time for me to be able to safely transfer everything over to the new company. From what I know, here are the steps involved:
* transfer H1B - 1 month
* New labor - 3 month (max)
* I-140 - 1 month (premium)
So within 5 months, I-140 could be approved and then I'll be able to extend my H1B.
1. Is the timeframe I am thinking realistic?
2. Since I only have about 7 months left in my current H1B, is it wise to take this risk?
3. What could be the greatest risk in transferring companies at this stage?
Thanks in advance for your help.
I have had several interviews but some of the employers were worried about the fact that I am in my 6th year and whether there was enough time for me to be able to safely transfer everything over to the new company. From what I know, here are the steps involved:
* transfer H1B - 1 month
* New labor - 3 month (max)
* I-140 - 1 month (premium)
So within 5 months, I-140 could be approved and then I'll be able to extend my H1B.
1. Is the timeframe I am thinking realistic?
2. Since I only have about 7 months left in my current H1B, is it wise to take this risk?
3. What could be the greatest risk in transferring companies at this stage?
Thanks in advance for your help.
snathan
05-04 11:24 PM
I would also recommend to go through an attorney as the cost is not worth to lose your status...
more...
sdeshpan
07-10 04:29 PM
Wow, surprisingly the Eb-2 dates have moved ahead by 2 yrs!! I have a feeling they will go back to 2000 next month :p
2010 RYAN NEWMAN 2011 ARMY 1:64 ARC
seekerofpeace
10-05 11:05 PM
that was hilarious GCN007...BTW my wife got approved to finally....
Years ago or should I say ages ago not even in the US of A but at Heathrow at the American Airlines counter (that time I was a student for MS) the lady was going thru my I-20 and was asking for additional documents et al...so I had this bunch of documents in my folder...and her eyes landed on my degree certificate...she asked me you have a degree from IIT and you couldn't get a job still ? that's why you are going for your MS....i was like well I wanted to do research....why not in India? I was like this is not even USA and this is my 2nd visit to USA (after the Christmas break in the 2nd year)....why are they asking so many questions and this is pre-9/11.....
I was like why is she harassing me....Do you have intentions of staying back in the USA after you finish your MS....I said no I plan to do my PhD in the UK...She gave me a ugly look and stamped my passport and let me go....
SoP
Years ago or should I say ages ago not even in the US of A but at Heathrow at the American Airlines counter (that time I was a student for MS) the lady was going thru my I-20 and was asking for additional documents et al...so I had this bunch of documents in my folder...and her eyes landed on my degree certificate...she asked me you have a degree from IIT and you couldn't get a job still ? that's why you are going for your MS....i was like well I wanted to do research....why not in India? I was like this is not even USA and this is my 2nd visit to USA (after the Christmas break in the 2nd year)....why are they asking so many questions and this is pre-9/11.....
I was like why is she harassing me....Do you have intentions of staying back in the USA after you finish your MS....I said no I plan to do my PhD in the UK...She gave me a ugly look and stamped my passport and let me go....
SoP
more...
ARUNRAMANATHAN
10-24 02:47 PM
Yes you can, but you need to go thru the labor and i-140 once again.... Yes you can use the PD from EB3 to EB2 .. But do check what kind of proof you need to do so ......
Good Luck !
Good Luck !
hair Ryan Newman
485_se_dukhi
08-15 08:56 AM
I'm posting it where ever I can on different forums.
more...
kaisersose
08-24 01:50 PM
One a 485 is applied and is pending, it is possible to replace the underlying 140, even if it is from a different employer.
Reasons why one would do this -
1. Moved away from sponsored employer within 180 days and a job offer from this employer is no longer available
2. Job Role changed significantly enough to warrant a new Labor.
3. AN old Labor with an earlier PD suddenly got approved. Get a 140 approved for this Labor and replace the earlier 140 with this one.
4. Upgrade from eb3 to eb2.
Reasons why one would do this -
1. Moved away from sponsored employer within 180 days and a job offer from this employer is no longer available
2. Job Role changed significantly enough to warrant a new Labor.
3. AN old Labor with an earlier PD suddenly got approved. Get a 140 approved for this Labor and replace the earlier 140 with this one.
4. Upgrade from eb3 to eb2.
hot 19259 Ryan Newman 2011 Army
Sunx_2004
10-10 12:36 PM
My application reached NSC on July 17th, No updates yet..:mad:
more...
house Florida USA Ryan Newman
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
tattoo Ryan Newman
Ramba
01-04 12:07 PM
I am in non-IT engineering field having stressful job, as my job is always challanging. Though, I have good career record, I want to get into relaxing job. I am getting advise to change my field to IT. Few of them advise me to take course in QA or SAP to change the field.
As most of the forum members are in IT field, perhaps this is a right place to get some advise.
I want to have a relaxing/flexible job as I want to enjoy the job (no brainy job, as I have done enough in my field). Are these QA or SAP jobs are stress free? What is the prospects or future for those jobs in long term? Before giving up 10 year career in engineering, I would like to do trade studies.
Thanks..
As most of the forum members are in IT field, perhaps this is a right place to get some advise.
I want to have a relaxing/flexible job as I want to enjoy the job (no brainy job, as I have done enough in my field). Are these QA or SAP jobs are stress free? What is the prospects or future for those jobs in long term? Before giving up 10 year career in engineering, I would like to do trade studies.
Thanks..
more...
pictures View full sizeRyan Newman
priderock
07-12 02:47 PM
Can some one change the title a little bit. I thought some body got a rejection when I first saw the heading.
dresses 2011 Ryan Newman #39
shirish
11-12 08:49 PM
I applied without medicals for myself, my wife and my son. I got everything except AP. Did the FP one week back.
I applied without the medical for my wife, my son and me and I already received my receipts and EAD almost one month ago. My wife and my AP show an LUD yesterday and today but still pending but my son didn't show anything. USCIS received my application on August 14.
I hope this can help.
I applied without the medical for my wife, my son and me and I already received my receipts and EAD almost one month ago. My wife and my AP show an LUD yesterday and today but still pending but my son didn't show anything. USCIS received my application on August 14.
I hope this can help.
more...
makeup Ryan Newman speaks to
smuggymba
09-14 02:09 PM
I feel paid and verified membership is much better. That way we can raise the money and we won't have trash talkers between us and we will know everyone by name......a team rather than an online platform. Just a thought.
girlfriend Ryan Newman. 8 February 2011
gc101
07-20 06:01 PM
Hi,
What does 'RIP' Labor Substitution mean. Pardon my ignorance.
gc101.
What does 'RIP' Labor Substitution mean. Pardon my ignorance.
gc101.
hairstyles Ryan Newman G-Force
ameryki
08-27 10:21 PM
mate i am in the same boat as you. but I personally don't think anything can be done to change that. It is completely based on IO's judgement when approving application.
lvaka
07-18 10:58 AM
I read some where that filing is allowed to Aug-17, but the new fees will effected on 01-Aug although July filers.
Correct me If I'm wrong.
Here is the Actual update link from USCIS.gov
http://www.uscis.gov/files/pressrelease/VisaBulletinUpdate17Jul07.pdf
You can go to USCIS.gov page and look for the press releases.
New fees will apply to the ppl whose labor gets approved after July 31st. For all the guys who are eligible according to the June 12th Visa Bulletin, though they apply till Aug 7th, only old fees applies.
Good luck.
Correct me If I'm wrong.
Here is the Actual update link from USCIS.gov
http://www.uscis.gov/files/pressrelease/VisaBulletinUpdate17Jul07.pdf
You can go to USCIS.gov page and look for the press releases.
New fees will apply to the ppl whose labor gets approved after July 31st. For all the guys who are eligible according to the June 12th Visa Bulletin, though they apply till Aug 7th, only old fees applies.
Good luck.
mbartosik
11-04 12:09 PM
It sounds like the UK is planning on increasing the points required for residence. I see nothing wrong with regulating the points required for residence based on needs of the country. Here it is done my H1B quota, but they forgot to change the EB GC quota too, and that's much of our aim here. In the UK it is done by points. Of course increasing the points will mean that average wage by those of non-British origin will go up. I'm quite sure that we on H1B have above average wage in US too.
In the UK things are further complicated because of migration within the EU to the UK both legal and illegal.
Anyway, this is interesting, but what's happening in the UK is of academic interest only. As far as I'm aware there is not a 12 year wait in the UK for an "indefinite leave to stay" stamp in passport (equiv of GC), and there is not a country quota.
If we don't work with IV, then Lou Dobbs will be saying that "immigrants are being paid more", and then in the next breath, "immigrants are under cutting US citizens". Hang on, I think that I've heard him say both of these things already!
That's why we need to act now, before we are kicked out for both earning more and under cutting!
In the UK things are further complicated because of migration within the EU to the UK both legal and illegal.
Anyway, this is interesting, but what's happening in the UK is of academic interest only. As far as I'm aware there is not a 12 year wait in the UK for an "indefinite leave to stay" stamp in passport (equiv of GC), and there is not a country quota.
If we don't work with IV, then Lou Dobbs will be saying that "immigrants are being paid more", and then in the next breath, "immigrants are under cutting US citizens". Hang on, I think that I've heard him say both of these things already!
That's why we need to act now, before we are kicked out for both earning more and under cutting!
